Seagate Disk Repair Tools

/ Comments off
  1. Seagate Hdd Tools Download
  2. Seagate Hard Disk Repair Tool Download
  3. Software Seagate Hard Disk Repair Tools
  4. Seagate Disk Check Tool

Automatically back up all your important files from your computer to your storage device. Command line tools optimized for Seagate Solid State Drives. Windows and Linux versions. SeaTools SSD GUI. Double clutch meaning gaming. Graphical dashboard and diagnostic tools optimized for Seagate Solid State Drives. Windows and Linux versions. SeaTools (Windows) Use this Windows version of the SeaTools GUI to diagnose hard drives and monitor SSDs. The repair tool supports the HDD list: 01) 104# For Seagate 7200.11 ST31500341AS 1500G - Four discs and eight heads; 02) For Seagate 7200.11 ST31000340AS 1000G - Four discs and eight heads. This head comb is suitable for built-in 3.5-inch hard drive.

Check and repair hard disk error in Windows 10/8/7 with Chkdsk: Before trying a third-party hard.

Latest news: DFL-SRP USB3.0 For Seagate will be shipped to users instead of DFL-STII.

Video Instruction Of DFL-STII here:

DFL-FRP Seagate(DFL-ST II) is one new generation Seagate hard drive firmware repair tool and users can use it to repair the damaged firmware modules, remove the passwords and repair the damaged Seagate hard drives including almost all the major families and it’s easy for this tool to add the latest families with its open and flexible design.

DFL-FRP Seagate((DFL-ST II)) hdd firmware repair tool was designed with two independent data channels: One native IDE channel connecting one IDE hard drive(For IDE hard drives, the native port is required for executing some special commands) and one SATA channel connecting one SATA hard drive. That is to say DFL-STII is able to repair firmware failures of two Seagate hard drives at the same time.

With DFL-STII hdd firmware repair tool, users are able to operate on Seagate Barracuda 7200.10, .9 and below and also the new F3 family including the latest Seagate 7200.14 hard drives. DFL-STII offers the following functions and solutions for all above families:

1, Repair two hard drives at the same time;
2, Full hdd tests;
3, Adding common commands(ATA & COM commands) easily and manually for easier and direct execution by simple clicks;

4, Read/write firmware modules;
5, Read/write ROM;
6, Read/Write SA areas;
7, Read/Write tracks;

8, Read/Write CP;
9, Auto Get HDD ID Info and display in details;
10, Adjustable baud rate and users are able to set to max when trying to read modules/tracks/SA/ROM;

11, Seagate Common failure solutions/fast solutions for data recovery purpose;
12, Sector view/editing;
13, Adaptive data editing and control;
14, View and Clear defects list/Format;
15, Smart Operations;
16, Translator operations;

17, F3 Adaptive ROM generation by loading ROM from the patient hard drive and donor hard drive. This is one creative and unique feature by Dolphin Data Lab and it’s especially useful when users swap heads of F3 hard drives. After swapping heads of F3, the original ROM will be incompatible and now users can save time and maximize the Seagate F3 head swap success rate by writing this generated adaptive ROM;

18, Unlock password protected hard drives;

Dolphin Data Lab will keep upgrading this Seagate hdd firmware repair tool and will later release more powerful firmware repair solutions. At the same time, we are also working on the other DFL series data recovery tools.

We will keep adding new functions to this tool and users will get the new functions for free for the first three years and from the 4th year, it will be USD200 yearly fee to get the upgrade immediately! Users can still get the upgrade for free after three years but need to wait 6 months more after the upgrade is released. Please keep an eye on our official website or forum:

How To Buy DFL-STII from Dolphin Data Lab?

Seagate Hdd Tools Download

Any question is welcome to [email protected].

We answer all emails within 24 hours, if the users don’t get reply by above email, it’s mainly due to the email system blocking our email, please then add our skype account:

Summary :

Seagate is a recognized and trusted hard drive brand for most users. After being used for a period of time, the Seagate disk might fail due to various factors. In this post, MiniTool Solution introduces some Seagate Disk tools for Windows to diagnose Seagate hard drive easily.

Quick Navigation :

When Do You Need to Diagnose Seagate Hard Drive

In 1980, Seagate (Seagate Technology PLC), an American data storage company, developed the first 5.25-inch hard disk drive (HDD). As time goes by, Seagate becomes one of the leaders in data storage solutions and the dominations of the HDD market.

Compared to the hard drive of another outstanding manufacturer, Western Digital, Seagate hard drive usually has faster read-write speed, according to the test. However, the failure rate of Seagate hard drive is also higher than that of Western Digital hard drive. For more differences, you can read the following article: Seagate vs Western Digital – What Are the Differences on Storage.

Therefore, you need to pay attention when you see the following symptoms, as they might indicate disk failure on your Seagate hard drive:

  • Your computer freezes or crashes frequently.
  • It takes long time to access folders and files.
  • Strange sounds appear when the hard drive works.
  • M.A.R.T status is not OK.

Seagate Hard Disk Repair Tool Download

Once one of the symptoms happens, you should check if there are any problems on your hard drive. How to check it? Some tools which you can use to diagnose your Seagate hard drive are listed in the following content.

Option 1: CHKDSK Utility

One of the Seagate disk tools for Windows is the built-in CHKDSK utility. CHKDSK refers to “check disk”, and it’s a system tool and command in DOS, Microsoft Windows, Digital Research FlexOS and related operating systems. It checks the file system and file system metadata of a volume for logical and physical errors.

When you suspect that your Seagate hard drive might be corrupted, you can run this tool to check for any errors. Here are three ways to run CHKDSK, and you can choose one you prefer.

Use File Explorer

An easy way to run CHKDSK is to open File Explorer, locate the target hard drive and then access the tool. The detailed steps are listed below.

Step 1: Press Win + E to open File Explorer.

Step 2: Under Devices and drives category, right-click the hard drive you want to check for errors and select Properties.

Step 3: Choose Tools tab. Then click Check button under Error checking section.

If there are any found errors, Windows will ask you to fix the errors.

Use Disk Management

Alternatively, you can access the tool with Disk Management.

Step 1: Right-click Start menu and select Disk Management.

Step 2: In the pop-up window, right-click the drive to check and then choose Properties.

Step 3: Now, click Check under Tools tab.

Use Command Prompt

You can also use Command Prompt to fix Seagate hard drive failure. However, if you are not familiar with Command Prompt, you’re recommended to try one of the ways above, as any mistakes could lead to data loss or even damage to your Seagate hard drive.

Step 1: Press Win + R to invoke Run window. Then type cmd in the box and press Shift + Ctrl + Enter to run Command Prompt as administrator.

Tip: You can also press Win + S to open Search and input cmd in the search box. Then right-click Command Prompt App and select Run as administrator.

Step 2: When you get into Command Prompt, input the command chkdsk *: /f (* refers to the drive letter of the target drive). Then press Enter to execute the command.

Then Windows will check for errors and fix them automatically. You just need to wait patiently until the process is completed. Then exit the Command Prompt and restart your computer and see if your Seagate hard drive works properly.

Option 2: Seagate SeaTools

Major disk manufacturers usually provide their own disk diagnostic tools, which allow extensive surface testing, low-level formatting, and defective sector remapping.

Seagate has introduced two hard drive diagnostic programs – SeaTools for DOS and SeaTools for Windows.

The DOS version can be used to diagnose Seagate or Maxtor PATA, IDE, and SATA hard drives, while the Windows version is available for more interfaces, such as USB, ATA, SATA and SCSI. You can use them to check for file system corruption, broken master boots record, driver corruption and some other hard drive issues.

You can download a version according to your needs from the official website of Seagate and then install it.

Tip: If you want to use SeaTools for DOS, you need to download the bootable CD image version from the website as it is used in Recovery Environment. Then create a CD using the bootable CD image file and boot your computer from the CD.

Before you use Seagate SeaTools to check for errors and fix Seagate hard drive failure, here are some tips which you should pay attention to:

  • Back up your data. Before you run any disk repair features with Seagate SeaTools, please back up all your data, as you might be at the risk of data loss when this tool reallocates the problematic sectors of your hard drive.
  • Completely close all the other applications. If you have some other programs running during the diagnostic process, the hard drive might become busy to access much data at the same time. This won’t do harm to your Seagate hard drive, but the error checking process will be much longer. So, you’d better close them all before you run a hard drive diagnostic with this tool.
  • Keep your computer powered on during the process. A full drive scan might take a few hours to finish. If you are using the laptop, you should connect the power cable to ensure adequate power while running this tool.

Then you can follow the steps below to test your Seagate hard drive:

  1. Launch the tool and check the hard drive you want to diagnose.
  2. Click Basic Tests.
  3. Select one of the test types (from Fix All, Short Drive Self Test, Drive Information, Short Generic, Long Generic and Advanced Tests).
  4. Then check the report of results.

If you want to test your Seagate hard disk, the diagnostic tool from the manufacture is a good choice, but there is another easy and safe tool you can take into consideration. You are able to see more information in the following part.

Option 3: MiniTool Partition Wizard – a Free Third-Party Tool

Besides the Seagate disk tools for Windows mentioned in the former parts, you can also use a third-party program to fix Seagate hard drive failure. MiniTool Partition Wizard, a disk manager, is a reliable one you can choose.

With MiniTool Partition Wizard, you are able to manage your disk type (MBR or GPT), your file system, your partition size and location, and you can even upgrade your hard drive.

In the following contents, I will introduce you how to use MiniTool Partition Wizard Free Edition to diagnose your Seagate hard drive and fix Seagate hard drive failure.

There are two features in MiniTool Partition Wizard you can use to diagnose your Seagate hard drive: Surface Test and Check File System. The former one is used to scan for any physical errors on your Seagate hard drive and you can use the later one to check and fix logical failure. I will explain them one by one for you.

Surface Test

To scan for bad sectors, you need to download and install MiniTool Partition Wizard Free Edition by clicking the following button. Then follow the steps below.

Tip: If your computer cannot boot, you can try MiniTool Partition Wizard Bootable Edition to test your Seagate hard drive.

Step 1: Click the MiniTool Partition Wizard icon on desktop to launch the application.

Step 2: Select your Seagate hard drive and click Surface Test from the left action panel.

Tip: You can also right-click the target disk and then select Surface Test from the pop-up menu.

Step 3: Hit Start Now button to start the testing process.

Then MiniTool Partition Wizard will scan each sector status by reading data from the sector automatically. You just need to wait patiently for the test result. The disk block without read error will be marked with green. If there are any read errors, the block will be marked with red.

If you see red blocks after the scanning, you need to transfer the data on your hard drive to another disk and then shield bad tracks with specific software. If there are still any errors, you have to ask professionals to repair the physical bad sectors or change your hard drive.

Check File System

If you have tried Surface Test and all your blocks are marked by green, you need to check if there are any logical errors happen on your Seagate hard drive. You can use the Check File System feature of MiniTool Partition Wizard.

Step 1: Launch MiniTool Partition Wizard.

Step 2: Select a partition on your Seagate hard drive and click Check File System from the left action panel.

Step 3: In to pop-up window, choose the option Check & fix detected errors and then click Start to begin scanning and fixing any hard drive errors.

It might take some time to finish the process. Please wait patiently. Then close the application and check if your Seagate disk works without any problems.

Bottom Line

Are you looking for Seagate disk diagnostics tools? In this post, you can find 3 options which you can take into consideration. You are free to choose one according to your needs.

If you have any questions or better options, please leave a message in the following comment section. For any problems you encounter while using MiniTool Partition Wizard, you can contact with us via [email protected].

Seagate Disk Tools FAQ

Software Seagate Hard Disk Repair Tools

Does Seagate offer hard drive diagnostic software?
Most hard drive manufacturers have their own diagnostic software, including Seagate. Seagate offers two sets of hard drive diagnostic software: Seagate SeaTool for DOS and Seagate SeaTool for Windows. You can use them to test your Seagate hard drive. Besides, MiniTool Partition Wizard is also a grate choice among hard drive diagnostic software.

Seagate Disk Check Tool

Generally, a hard drive can be used for three to five years on average. According to the BackBlaze, an online backup company, 90% of hard drives survive for three years, and 80% for four years. And it is found that Western Digital and Hitachi hard drives lasted much longer than Seagate hard drives.
There are essentially two reasons why drives fail: physical errors and logical errors. Usually, physical errors are hard to repair while logical errors are much easier to fix. To fix Seagate hard drive errors, you can use try these Seagate disk diagnostics tools introduced in this post.

When it comes to hard drive brands, you must have heard of Seagate, Western Digital, Samsung and some other manufacturers. As one of the leaders in data storage solution, Seagate hard drive is a nice choice.

However, despite of the reliability, hard drive failure is possible to happen no matter which brand of disk you are using.